Skip to content

How to increase in crochet: 2 sc in one stitch, inc rounds and edges

How to increase in crochet: work two stitches in one, read "inc" and "2 sc in next st", grow a flat circle by 6 a round and add stitches at row edges.

· 7 min read

Cover card reading How to increase in crochet: 2 sc in one stitch, inc rounds and edges

To increase in crochet, you work two stitches into the same stitch of the row below. For single crochet, insert the hook in the next stitch, work a single crochet, then insert the hook in that same stitch again and work a second one. You now have two stitches where there was one, so your count goes up by one. Patterns write this as inc, sc inc or 2 sc in next st.

All stitch names here are US terms. UK patterns call the US single crochet a double crochet, so UK “2 dc in next st” is US “2 sc in next st”. There is a short table near the end, and our US vs UK guide explains the shift.

How to work a single crochet increase

  1. Work a single crochet in the next stitch as usual.
  2. Insert the hook into the same stitch again, under the same two loops.
  3. Yarn over, pull up a loop, yarn over and pull through both loops.

Both new stitches share one base. When you look at the top of the row, you see two Vs side by side sitting on a single stitch.

The same idea works for every stitch height. For a double crochet increase, work a double crochet, then a second double crochet in the same stitch. A pattern might write it like this:

Row 4: Ch 3 (counts as dc), dc in same st, dc in each st to last st, 2 dc in last st, turn. (22 sts)

That row starts with 20 stitches and gains one at each edge.

How patterns write increases

Designers use a few forms for the same move:

  • inc: common in amigurumi. The notes say which stitch, almost always single crochet.
  • 2 sc in next st or 2 dc in next st: the full form. The number tells you how many stitches go into one.
  • 3 sc in next st: a double increase. You use this at the corners of squares and at the point of a chevron peak. It adds two stitches.
  • (sc, ch 1, sc) in next st or (dc, ch 2, dc) in next st: a stitch group. Everything inside the brackets goes into one stitch.

The count at the end of the row is your check. If a row ends “(24 sts)”, count the tops before you turn. A missed increase is easy to fix now and annoying to find three rows later. Our post on counting crochet rows and stitches shows how to count the tops without losing track.

Increase rounds: growing a flat circle

Flat circles and the tops of hats, baskets and amigurumi heads all grow the same way. In single crochet, you start with 6 stitches and add 6 in every round.

Rnd 1: 6 sc in magic ring. (6 sts)

Rnd 2: Inc in each st around. (12 sts)

Rnd 3: (Sc in next st, inc) 6 times. (18 sts)

Rnd 4: (Sc in next 2 sts, inc) 6 times. (24 sts)

Rnd 5: (Sc in next 3 sts, inc) 6 times. (30 sts)

Each round, the plain stitches before the increase go up by one. Round 6 is “(sc in next 4 sts, inc) 6 times” for 36 stitches, and so on. Once you see that pattern, you can check any round in your head: number of plain stitches plus 2, times 6, is the count.

Work in a spiral without joining, or join each round with a sl st and ch 1 if your pattern says so. The ch 1 does not count as a stitch.

Taller stitches need more increases per round to lie flat. A double crochet circle usually starts with 12 stitches and adds 12 a round. Follow your pattern here. Designers start hdc and dc circles with different counts. Your pattern’s numbers match its later rounds.

The brackets with “6 times” work like any other repeat. If that notation is new, how to read pattern repeats walks through it.

Keep a circle round, not hexagonal

If you always put the increase at the end of the bracket, the increases stack in six columns. After a few rounds the increases usually show as six corners, and the circle turns into a hexagon.

The fix is to stagger them. Many patterns do it for you by splitting the plain stitches on alternate rounds:

Rnd 5: Sc in next st, inc, *sc in next 3 sts, inc; rep from * 4 more times, sc in next 2 sts. (30 sts)

You still have 6 increases and the same total, but each one sits in a new spot. If your pattern does not stagger them and you want a rounder edge, you can do this yourself in single crochet circles. The count stays the same, so the rest of the pattern still fits.

Increasing at the edges of a row

Flat pieces worked in rows, like a triangle shawl or a sleeve, often increase at one or both edges:

Row 6: Ch 1, 2 sc in first st, sc in each st to last st, 2 sc in last st, turn. (2 sts increased)

Some patterns move the increase one stitch in from the edge. That keeps the edge stitch plain and makes seaming or adding a border easier. Use the placement your pattern gives.

Watch the turning chain. “Ch 3 (counts as dc), dc in same st” means the turning chain is your first stitch and the dc goes into the base of it. If the chain does not count, work 2 dc in the first stitch of the row.

Adding several stitches at once

To widen a piece by many stitches in one go, patterns chain extra at the end of a row and work back across them:

Row 12: Sc in each st across, ch 6, turn.

Row 13: Sc in 2nd ch from hook and next 4 ch, sc in each st across. (5 sts increased)

The chain needs one more stitch than you add, because the first chain from the hook is the turning chain for single crochet. You see this at the underarm of top-down garments and in stepped shapes.

Spacing increases evenly across a row

Some patterns say “inc 6 sts evenly across” and leave the maths to you. Divide the stitch count by the number of increases.

With 30 stitches and 6 increases, 30 divided by 6 is 5. Work the increase in every 5th stitch: (sc in next 4 sts, inc) 6 times. That gives you 36 stitches.

When it does not divide neatly, spread the leftover stitches at the ends. With 32 stitches and 6 increases, 32 divided by 6 is 5 with 2 left over. Work 1 sc, then (sc in next 4 sts, inc) 6 times, then 1 sc. The extra plain stitches sit at each edge and the increases stay even in the middle.

Common increase mistakes

  • Working into the same stitch three times. After the second stitch, move on. A third stitch adds a stitch you did not want.
  • Skipping the stitch after an increase. The next stitch can hide under the two you just made. Look for the next V before you insert the hook.
  • Losing the start of the round. In spiral rounds there is no join to tell you where a round ends. Put a stitch marker in the first stitch of each round and move it up as you go.

Keep a count of rounds on paper or with a counter. Our row counter runs in your browser. If you follow your patterns in Yarnstep, the stitch count from your own pattern sits beside each row, so you can check every increase round before you start the next.

US and UK names for increases

The method is the same in both. Only the stitch names change.

US patternUK patternStitch you work twice
2 sc in next st2 dc in next stsingle crochet (UK double crochet)
2 hdc in next st2 htr in next sthalf double crochet (UK half treble)
2 dc in next st2 tr in next stdouble crochet (UK treble)

The trap is “2 dc in next st”, which means a different stitch in each system. Check which terms your pattern uses before you start. When you need to shape the other way, how to decrease in crochet covers sc2tog, dc2tog and the invisible decrease.

Questions people ask

Does a crochet increase count as one stitch or two?

It makes two stitches from one, so your count goes up by one. Count both tops when you check the row.

What does inc mean in an amigurumi pattern?

Work 2 single crochet in the next stitch. Most amigurumi patterns are worked in single crochet, so "inc" means 2 sc in one stitch unless the notes say otherwise.

Why is my crochet circle turning into a hexagon?

Your increases stack on top of each other round after round, which makes six corners. Move the increase to a new spot each round (see "Keep a circle round") and the edge stays round.

Why does my flat circle ruffle or cup?

Ruffles mean too many stitches for the size of the circle; cupping means too few. Check your count at the end of every round against the pattern.